How Tetouan Leather Is Tooled

The geometric patterns on our totes are not printed, embossed by machine, or laser-etched. They are struck into damp leather with steel stamps and a mallet, one impression at a time.

The process

The hide is cased — dampened to a specific moisture level, which is judged by hand rather than measured. Too dry and the stamp will not bite; too wet and the impression closes up as it dries. The artisan then works across the panel, positioning each stamp by eye against the last.

Why the pattern drifts

Because there is no jig. A panel of several hundred impressions accumulates tiny variations in spacing and depth, and those variations are what tell you a person made it. A machine-embossed panel is perfectly regular, and reads as flat.

What to look for

Turn a tooled bag to a raking light. Hand work shows slight differences in depth from one impression to the next, and the burnished edges will show the faint ridges of a hand slicker. Machine work shows uniform depth and a perfectly even edge.

How it ages

Tooled leather darkens fastest in the recesses, so the pattern gains contrast over the first year or two. This is the opposite of a printed finish, which wears away. A tooled bag looks better at five years than at five weeks.